Mini-Circuits Israel Ltd.
Legal Information
Sales order terms and conditions, privacy policy and website terms of use.
Sales Order Terms and Conditions
Mini- Circuits Israel Ltd.
TERMS AND CONDITIONS
MINI-CIRCUITS ISRAEL LTD.
SALES ORDER TERMS AND CONDITIONS
(Reference to web link)
Sales Order Terms and Conditions
Subject to the next sentence, Mini-Circuits Israel Ltd.’s (“Company”) acceptance of your company’s order is subject to the terms and conditions set forth below and on the face of the Company’s applicable invoice (collectively “Terms”). However, if such terms and conditions would not otherwise become part of the contract between our companies due to other documents or circumstances, then (i) acceptance of your company’s order is expressly made conditional upon your company’s assent to the Terms and (ii) if your company does not assent to the Terms, there is no contract. In the event any of the Terms conflict with the terms and conditions contained in your company’s order, the conflict will be resolved in favor of the Terms.
1. Conformity. The Company’s applicable invoice acknowledges the type and quantity of goods ordered by your company (“Purchaser”) as interpreted by the Company. Purchaser’s silence indicates Purchaser’s acceptance and the correctness of the Company’s invoice. However, if the goods shipped do not conform to the type and quantity ordered as reflected on the Company’s invoice, they will be deemed to have been shipped merely as an ACCOMMODATION in an effort to serve the needs of Purchaser.
2. Limitation and Disclaimer of Warranties and Liabilities. (a) Subject to the provisions and qualifications hereof, Company warrants only to Purchaser that on the date of shipment the goods sold pursuant hereto (“Goods”) will conform to Company’s applicable Specifications (as defined below) in effect on the date of shipment, as may be further amended by Company from time to time. Conformance to the Specifications will be based on Company’s then applicable established test performance criteria and measurement instructions, as determined by Company. The warranty period will be for a period of twelve (12) months after shipment from Company’s applicable plant, unless another period is specified (the “Warranty Period”). The term “Specifications” means the Company’s applicable specification sheet(s) concerning a particular Goods as designated by Company from time to time.
Without the prior written consent of Company, Goods sold pursuant hereto are not authorized for use as critical components in (i) devices, implements or systems utilized in air or space flight; (ii) medical devices, implements or systems; or (iii) life support devices, implements or systems (collectively, “Space and Medical Systems”). Accordingly, Goods that are used in Space and Medical Systems are sold “AS IS, WITH ALL FAULTS”. The express warranty specified in paragraph 2(a) does not apply to Goods used in Space and Medical Systems and Company will have no responsibility or liability in connection therewith and same are hereby waived. As used herein, “life support devices, implements or systems” are those which (i) are intended for surgical implant into the body; or (ii) support or sustain life. A “critical component” is any component of a device, implement or system whose failure to perform does or can reasonably be expected to result in injury to person or property or cause a failure in that device, implement or system or affect its safety or effectiveness.
(b) It is hereby acknowledged and agreed that there are many variables affecting the proper selection, use and installation of goods manufactured or sold by Company since each potential system utilizing these goods is unique with differing component configurations and attributes and differing requirements and environments. Accordingly, notwithstanding any information provided by Company, Purchaser is responsible for consulting with its own engineers and other appropriate professionals who are familiar with the specific systems into which Goods are to be incorporated so that the proper selection, use and installation of such goods, and the adequacy of the system and back-up systems, can be determined. As a result, Purchaser shall be barred from any recovery against Company (including, without limitation, any recovery under the express warranty specified in paragraph 2(a)) by reason of improper selection, use and/or installation of the Goods and, with respect to the systems in which such goods are to be utilized, improper system design and/or the inadequacy of back-up systems, and Company shall have no liability on account thereof, and same is hereby waived.
Further, Purchaser shall also be barred from any recovery (including, without limitation, any recovery under the express warranty specified in paragraph 2(a)) and Company shall have no liability on account of any of the following, or the use of the affected Goods:(i) any Goods which have been subject to accident, negligence, alteration, abuse, tampering, misuse, improper storage (including, without limitation, exposure to weather), improper maintenance, improper removal, improper installation or the like; (ii) any Goods which are not used with compatible components or in appropriate environments; (iii) any Goods which are used outside of stated absolute maximum ratings, or applicable service, pressure, temperature, frequency or other ranges or applications for which they were manufactured, as specified by Company; (iv) Permissible Defects (as defined below);(v) use of any Goods for Space and Medical Systems without the prior written consent of Company; (vi) failure to comply with Performance Conditions; (vii) unreasonable use, improper operation of Goods, use of Goods beyond normal fashion, failure to follow instructions, failure to maintain Goods in good condition and repair, or the like; (viii) without the prior written consent of Company, use of Non-Standard Goods (as defined below), it being understood that such goods are sold “AS IS”, “WITH ALL FAULTS”; and (ix) failures of or defects in Goods caused by another component or other element or influence within or outside of a given system including, without limitation, failures caused by voltage or current settings.
For purposes hereof, the term “Permissible Defects” means (i) deviations from the Specifications to the extent of variations and defects defined by The Institute for Interconnecting and Packaging Electronic Circuits; and (ii) permitted failures contained in Company’s applicable test performance criteria and measurement instructions as determined by Company. The term “Non-Standard Goods” means goods which are (i) derived from any specifications, drawings, technical information or other data (collectively, “Data”) supplied by Purchaser or Data supplied by Company but modified to meet Purchaser’s particular requirements or instructions; (ii) not listed as a standard product on Company’s then current catalog, as determined by Company; or (iii) developmental, experimental, first articles or prototype goods. The term “Performance Conditions” means the conditions, assumptions and recommendations contained in Company’s specifications, drawings, technical information, application notes or other data which are required to or should be satisfied in order for Goods to meet applicable Specifications on a consistent basis.
Purchaser further acknowledges and agrees that, if Purchaser purchases any Goods from an Unauthorized Source (as defined below), such goods will not be covered by the express warranty under paragraph 2(a). Accordingly, Purchaser is barred from any recovery (including, without limitation, any recovery under the express warranty specified in paragraph 2(a)) on account of the purchase of Goods from any Unauthorized Source, and such goods are sold “AS IS”, “WITH ALL FAULTS”, and Company will not provide any technical support therefor. For purposes hereof, the term “Unauthorized Source” means a Person other than Company, its subsidiaries or any of Company’s authorized representatives or distributors as specified on Company’s website at http://www.minicircuits.com/pages/contact.html, as may be modified from time to time.
For purposes hereof, the term “Person” means any natural person, corporation, division of a corporation, partnership, proprietorship, joint venture, association, trust, estate, foundation, or any other entity, whether or not incorporated, and any governmental authority, unit or agency.
(c) In the event a defect is discovered or should have been discovered from which it is reasonable to conclude that damage, either personal, property or economic, may result, the continued use of the suspect goods will constitute an assumption of the risk and a bar to any recovery against Company, including, without limitation, any recovery for breach of any express warranty.
(d) PURCHASER’S SOLE AND EXCLUSIVE RIGHTS AND REMEDIES IN CONNECTION WITH THE LIMITED WARRANTY CONTAINED IN PARAGRAPH 2(a) ARE ALSO LIMITED TO THE RIGHTS AND REMEDIES EXPRESSLY SET FORTH IN PARAGRAPH 3.
(e) IT IS EXPRESSLY UNDERSTOOD AND AGREED THAT THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION OF THE EXPRESS TERMS OF PARAGRAPH 2(a). THE EXPRESS WARRANTY SET FORTH IN PARAGRAPH 2(a) AND THE OBLIGATIONS AND LIABILITIES OF COMPANY THEREUNDER ARE EXCLUSIVE AND ARE EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, ARISING BY OPERATION OF LAW OR OTHERWISE, INCLUDING, WITHOUT LIMITATION, THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR THE PURPOSES FOR WHICH GOODS OF THE SAME DESCRIPTION WOULD ORDINARILY BE USED, CONFORMITY IN KIND (WHETHER SUCH CONFORMITY ARISES OUT OF FACTS WHICH COMPANY KNEW OR SHOULD HAVE KNOWN), DESCRIPTION, QUALITY, OR CHARACTERISTICS TO ANY MODEL OR SAMPLE, PACKAGING OR CONTAINMENT OF GOODS IN MANNER USUAL FOR SUCH GOODS OR, WHERE THERE IS NO SUCH MANNER, ADEQUATE TO PRESERVE AND PROTECT THE GOODS, AND QUALITY OR CHARACTERISTICS NECESSARY FOR ORDINARY OR COMMERCIAL USE INCONSISTENT OR INCOMPATIBLE WITH THE SPECIFICATIONS, WARRANTIES CONCERNING INFRINGEMENT, ATTACHMENT, SEIZURE OR ANY OTHER THIRD PARTY RIGHT OR THE LIKE, AND ANY WARRANTIES ARISING FROM COURSE OF PERFORMANCE, COURSE OF DEALING AND USAGE OF TRADE.
It is hereby expressly understood and agreed that unless a statement is specifically identified in this Invoice as a warranty, the statements made in these Terms relating to the Goods are not express warranties and do not form a part of the basis of the bargain but are merely Company’s opinion or commendation of the Goods. Any description of the goods specified in these Terms and any description of goods contained in any and all brochures, pamphlets or other literature of Company, whether delivered before or after the date hereof, are not intended to be warranties. Instead, they are for the sole purpose of identifying such goods; and such descriptions are not part of the basis of the bargain, and do not constitute a warranty that the Goods shall conform to those descriptions. The use of any sample, graph, data curve, model or drawing is for illustrative purposes only, conformity of the Goods to such sample, graph, data curve, model or drawing is not part of the basis of the bargain, and is not a warranty that the Goods will conform with the sample, graph, data curve, model or drawing. No affirmation of fact or promise made by or on behalf of Company, whether or not in these Terms, shall constitute a warranty that the Goods will conform to the affirmation or promise.
(f) COMPANY NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE OF GOODS HEREUNDER.
3. LIMITATION OF REMEDIES, WAIVER OF CONSEQUENTIAL DAMAGES. (a) EXCEPT AS OTHERWISE EXPRESSLY STATED IN PARAGRAPHS 3(b) and 7, COMPANY’S SOLE AND EXCLUSIVE OBLIGATION AND LIABILITY WITH RESPECT TO (i) ANY BREACH OF WARRANTY, EXPRESS OR IMPLIED (UNDER THESE TERMS OR OTHERWISE), (ii) DEFECTS IN GOODS, NON-CONFORMITIES OF THE GOODS OR THE TENDER THEREOF, AND/OR (iii) OTHER BREACHES OF ANY OBLIGATION OR DUTY OWED BY COMPANY HEREUNDER OR UNDER APPLICABLE LAW, AND PURCHASER’S SOLE AND EXCLUSIVE RIGHTS AND REMEDIES WITH RESPECT THERETO, SHALL BE LIMITED TO THE REPAIR OR REPLACEMENT, AT COMPANY’S OPTION, OF ANY GOODS SOLD BY COMPANY WHICH MAY PROVE TO BE DEFECTIVE WITHIN THE WARRANTY PERIOD AS A DIRECT RESULT OF SUCH BREACH OF WARRANTY, DEFECT, NON-CONFORMITY OR OTHER BREACH. SUBJECT TO THE PROCEDURES SET FORTH BELOW, COMPANY WILL REPAIR OR REPLACE SUCH DEFECTIVE GOODS, AS THE CASE MAY BE, FREE OF CHARGE.
The determination of whether the Goods in question are defective will be made by Company in its sole and absolute discretion, and such determination shall be conclusive and binding on Purchaser. Company will give Purchaser notice of its determination within forty-five (45) days after Company receives such goods from Purchaser as provided herein. If Company determines that the Goods in question are defective, Company will identify the specific defective goods and remedy such defects in accordance with this paragraph 3 within a reasonable time after giving notice that the Goods are defective. In the event the Company determines that the Goods in question are not defective or are otherwise not covered by the express warranty contained in paragraph 2(a), a fee shall be charged to Purchaser to cover the costs of inspecting and testing such goods and any transportation and related charges incurred by Company, and Purchaser shall pay same promptly. Company will not be liable for damaged or destroyed Goods as a result of such inspection and testing, and, to the extent feasible, any remaining Goods will be returned to Purchaser at Purchaser’s expense.
In order for Purchaser to be entitled to receive the rights and remedies contained in this paragraph 3, Purchaser must, during the Warranty Period, notify Company in writing of the existence of possible defective Goods within thirty (30) days after discovery thereof or the time Purchaser should have discovered such possible defect or else such claims shall be deemed waived. Such notification shall contain a request for a return material authorization (“RMA”) from Company and Purchaser shall comply with Company’s then applicable RMA procedures. Within fifteen (15) days after receiving the RMA, Purchaser shall deliver the specified Goods to the applicable plant designated by Company for that purpose, all as stated in the RMA, free of all liens and encumbrances. Company may initially only request a small sample of Goods in the RMA. Purchaser will pay for the transportation of the suspect Goods from Purchaser’s plant to Company’s plant, all as specified in the RMA. Purchaser is also responsible and liable for all other costs and expenses in connection therewith including, without limitation, recalls and disassembly of any systems, testing, insurance, removal and installation charges and other costs and expenses incurred in connection with this paragraph 3. Purchaser shall bear the risk of loss of all such Goods returned pursuant to this paragraph 3.
If Company determines that the Goods in question are defective and are covered by the warranty specified in paragraph 2(a), Company will remedy such defects in accordance with this paragraph 3(a). However, if Company determines such Goods are not defective or are not covered by the warranty contained in paragraph 2(a), then, to the extent feasible, such non-defective Goods will be returned to Purchaser, at Purchaser’s sole cost and expense. In addition, Company shall charge a fee to Purchaser and Purchaser shall promptly pay a fee equal to the costs and expenses of testing and inspecting such Goods as incurred by Company. Purchaser shall promptly reimburse Company for such costs and expenses as well as the transportation expenses incurred by Company on account of the RMA. Company shall not be liable or responsible for damages or destroyed Goods as a result of such inspection or testing. Company shall have no liability or obligation to Purchaser for loss or damage resulting from the testing, repair, replacement, maintenance, loss of use of Goods, removal, recalls, disassembly of systems or subsequent reinstallation of Goods.
Purchaser hereby acknowledges and agrees that the notice and time periods specified in this paragraph 3 regarding discovery of defects, shipment of goods to Company, notification of defectiveness and the time to effectuate remedies are the appropriate, commercially reasonable and fair time and notice periods.
(b) IF AFTER A REASONABLE NUMBER OF ATTEMPTS BY
COMPANY TO REMEDY A DEFECT PURSUANT TO PARAGRAPH 3(a) AND THE
REMEDY FAILS OF ITS ESSENTIAL PURPOSE OR IS OTHERWISE DEEMED UNCONSCIONABLE OR UNENFORCEABLE IN THE JURISDICTION IN WHICH ENFORCEMENT IS SOUGHT, OR IN THE EVENT REPAIR OR REPLACEMENT IS NOT APPROPRIATE OR PRACTICAL AS DETERMINED BY COMPANY IN ITS SOLE AND ABSOLUTE DISCRETION, PURCHASER SHALL, AT COMPANY’S OPTION, EITHER RECEIVE (i) A REFUND OF THE PURCHASE PRICE FOR THE DEFECTIVE GOODS; OR (ii) A CREDIT IN AN AMOUNT EQUAL TO THE PURCHASE PRICE OF SUCH GOODS, IT BEING UNDERSTOOD THAT THE REMEDIES STATED IN THIS PARAGRAPH 3(b) SHALL THEN BE PURCHASER’S SOLE AND EXCLUSIVE REMEDY.
PURCHASER’S RIGHTS AND REMEDIES PROVIDED IN PARAGRAPHS 3(a)AND 3(b), AND IF APPLICABLE, PARAGRAPH 7 FOR THE MATTERS STATED THEREIN, SHALL BE PURCHASER’S SOLE AND EXCLUSIVE RIGHTS AND REMEDIES HEREUNDER AND ARE EXPRESSLY MADE IN SUBSTITUTION OF ANY AND ALL RIGHTS AND REMEDIES OTHERWISE PROVIDED UNDER APPLICABLE LAW.
(c) Notwithstanding Company’s rights under Article 37 of the Sale Law (International Sale of Goods), 5759-1999, Company shall further have the right to cure all non-conformities of Goods and the tender thereof without regard to whether Company had reasonable grounds for believing that the tender or non-conformities would be acceptable. Any such non-conformity and the tender thereof shall not be deemed to be a fundamental breach of this contract by Company. Company shall have such right to cure any such non-conformity and/or the tender thereof at any time within sixty (60) days after Company receives written notice by Purchaser to cure such non-conformity and/or tender thereof, even if Company effects such cure beyond the initial time for performance hereunder.
(d) THE MAXIMUM LIABILITY OF COMPANY ARISING OUT OF OR RELATING TO THE SALE OF GOODS EVIDENCED BY THE COMPANY’S INVOICE SHALL BE LIMITED TO THE PURCHASE PRICE OF GOODS SOLD HEREUNDER TO THE EXTENT ACTUALLY PAID FOR BY PURCHASER AND RECEIVED BY COMPANY. UNDER NO CIRCUMSTANCES SHALL COMPANY BE LIABLE TO PURCHASER OR ANY OTHER PERSON FOR ANY (i) DAMAGES ARISING OUT OF OR RELATING TO PERMISSIBLE DEFECTS; OR (ii) CONSEQUENTIAL, EXEMPLARY, INCIDENTAL, INDIRECT OR SPECIAL DAMAGES, OR LOST PROFITS, EXPENSES OR LOSSES DIRECTLY OR INDIRECTLY ARISING OUT OF OR RELATING TO ANY (1) BREACH OF WARRANTY, EXPRESS OR IMPLIED, UNDER THIS INVOICE OR OTHERWISE; (2) DEFECTIVE GOODS OR ANY NON-CONFORMITY OF THE GOODS OR THE TENDER THEREOF; OR (3) OTHER BREACH OF ANY OBLIGATION OR DUTY OWED BY COMPANY HEREUNDER OR UNDER APPLICABLE LAW, REGARDLESS OF WHETHER THE LIABILITY RESULTED FROM ANY GENERAL OR PARTICULAR REQUIREMENT OR NEED WHICH COMPANY KNEW OR FORESAW OR SHOULD HAVE KNOWN OF OR FORESEEN, IT BEING EXPRESSLY UNDERSTOOD THAT PURCHASER’S ONLY REMEDY SHALL BE THE REPAIR OR REPLACEMENT OR A REFUND OR CREDIT OF THE PURCHASE PRICE THEREFOR IN THE MANNER AND ONLY TO THE EXTENT SPECIFIED IN PARAGRAPHS 3(a), 3(b) or 7. IN THE EVENT THAT ANY OTHER PROVISION CONTAINED IN THESE TERMS IS FOUND UNCONSCIONABLE OR UNENFORCEABLE FOR ANY REASON, OR ANY EXCLUSIVE REMEDY FAILS OF ITS ESSENTIAL PURPOSE, THIS PROVISION OF WAIVER BY AGREEMENT OF CONSEQUENTIAL DAMAGES SHALL NEVERTHELESS CONTINUE IN FULL FORCE AND EFFECT.
4. Delivery; risk of loss and related matters. (a) Shipping dates are approximate and are based upon prompt receipt of all necessary documentation and information. Unless another mercantile symbol is utilized on the face of the Company’s invoice, Goods shall be delivered “ex works Company’s applicable plant”; as designated on the Company’s invoice, and in each instance Company is authorized to ship goods by carrier. Unless otherwise indicated, the foregoing mercantile symbol shall have the meaning ascribed to it under the International Commercial Terms - 2000. Payment shall be due within thirty (30) days after the later of (i) the date of shipment of the goods in question (however, if shipment is delayed by Purchaser, payment will be due thirty (30) days after the issuance of the applicable invoice by Company), or (ii) the date Company issues an invoice therefor. At Company’s option, Company may, for any reason, suspend the credit term specified above for any delivery and may demand cash payment on delivery or impose other payment terms including, without limitation, pre-payments. Notwithstanding anything to the contrary contained herein, Company reserves the right, under any circumstances, to delay deliveries indefinitely and to allocate production and deliveries of Goods among its various customers in Company’s sole discretion, and Company shall have no liability therefor. Such allocation may or may not be on a pro-rata basis and may be such that no allocation is made to Purchaser.
(b) Company shall have the right to deliver the entire order at one time or in portions from time to time within the time of delivery specified in paragraphs 7 and 8. Payment for partial shipments shall be due thirty (30) days after the later of (i) the date of such partial shipment (however, if such partial shipment is delayed by Purchaser, payment will be due thirty (30) days after the issuance of the applicable invoice by Company), or (ii) the date Company issues an invoice therefor. The price for partial shipments will be pro-rated as determined by Company and reflected on its invoice. Any delivery or portion thereof not made in accordance with the Company’s invoice shall not affect any fulfilled parts thereof, nor entitle Purchaser to reject subsequent deliveries, nor entitle Purchaser to off-set any invoices of Company. Without Company’s prior written consent (which may be withheld for any reason), orders and releases for Goods may not be rescheduled or cancelled by Purchaser and the Goods are not returnable, except that Purchaser may return defective Goods pursuant to Company’s RMA policy as specified in paragraph 3. Accordingly, Purchaser shall not have the right to accelerate, postpone, reschedule, cancel or otherwise modify the delivery dates and related shipment of Goods specified by Company on the face of Company’s invoice or in Company’s applicable quote or purchase order acknowledgement, as applicable (other than as provided in paragraph 7). If Purchaser attempts to do so, it will be deemed to have repudiated this contract.
(c) In the event Purchaser cancels orders or releases of any of the Goods which are the subject of the Company’s invoice, for Purchaser’s convenience, it shall pay Company’s then applicable cancellation fee as specified by Company from time to time.
(d) Due to fluctuations in inventory levels, RoHS compliant Goods may be substituted for Standard non-RoHS compliant Goods, unless Company receives a written instruction from Purchaser to the contrary. Goods that are RoHS compliant are clearly marked with a “+” suffix following the base model number of the Good in question. Purchaser hereby acknowledges and confirms that the designation by Company of a Good being RoHS compliant is based on and subject to the methodologies, assumptions and qualifications specified on Company’s website. To visit, please go to www.minicircuits.com and click on the “RoHS/REACH Program” button.
5. Price. Except as otherwise specified on the Company’s invoice, the purchase price for the Goods shall be the list price for such goods as reflected on Company’s price list at the time of shipment. In addition to the purchase price, Purchaser shall be responsible for and shall pay for any and all transportation costs, insurance expenses and all applicable national, regional and local sales, use, property, excise, value added tax, and other taxes, duties or governmental charges imposed on or with respect to the Goods, except taxes levied on Company’s net income. In the event of new taxes or increased rates which are applicable to the transactions contemplated hereby, the invoice issued to Purchaser shall be subsequently adjusted if necessary and Purchaser shall immediately pay any difference. Notwithstanding any prices specified on Company’s invoice, Company reserves the right to charge prices prevailing at the time of shipment for goods scheduled to be shipped on Company’s invoice more than six (6) months from the order entry date on Company’s records.
6. Title. Solely for the purpose of reserving a security interest in the Goods, Company retains title to such goods until they are paid in full by Purchaser. Such retention of title by Company shall not affect the passage of risk of loss as specified in paragraph 4.
7. Delays. Except as otherwise provided in paragraphs 3(c) and 8, Purchaser is entitled to cancel only that portion of any order which is excessively delayed, it being understood that time is not of the essence. Upon such cancellation, Purchaser shall only be entitled to a credit of the purchase price paid to Company for the portion of the order which has been canceled by Purchaser as a result of such excessive delay. Such remedy shall be Purchaser’s sole and exclusive remedy with respect to late deliveries, and is expressly made in substitution of all other rights and remedies otherwise provided under applicable law. However, if this remedy is deemed to fail of its essential purpose, paragraph 3(b) shall apply in the alternative. Purchaser acknowledges and agrees that Company shall not be liable or responsible for any resulting back-charges incurred by Purchaser on account of any such delays.
To invoke such cancellation, Purchaser must give Company ten (10) days prior written notice thereof provided, however, that (i) the Goods are not specially manufactured, or (ii) Company has not manufactured or shipped the Goods in the interim. In the event the Goods are specially manufactured, Purchaser may invoke such cancellation, provided, however, that Company has not commenced manufacturing, or made commitments for the procurement of the Goods or underlying raw materials.
8. Force Majeure. (a) Notwithstanding any provision herein to the contrary, Company shall not be liable or responsible for any delay in or failure of delivery of the Goods by reason of force majeure, including, but not limited to, Company’s inability to obtain raw materials from suppliers or to obtain same on a timely basis, or as a result of interruption of transportation, delays in delivery, governmental regulation, labor disputes, strikes, war, fire, flood, accidents, acts of God, civil disturbance, quota restrictions or any other cause beyond Company’s control, whether or not such cause be of the same class or kind as those enumerated above, such enumeration being expressly understood to be in addition to other causes or classes of causes beyond Company’s control. In the event of the occurrence of any such causes, Company shall have the right to allocate production and deliveries among its customers in such proportions as it deems appropriate, in its sole and absolute discretion.
(b) In the event Company is unable to make timely delivery of all or a portion of the Goods, by reason of any events or occurrences referred to in this paragraph 8, Purchaser must accept delivery of the Goods whenever Company is able to make such delivery regardless of the duration of the delay in delivery of the Goods, or Company may, in its sole and absolute discretion, cancel the undelivered portion of this Invoice without liability.
9. Limitation of Action. No action or proceeding at law, in equity or otherwise shall be commenced by Purchaser against Company for Company’s alleged breach of warranty (express or implied) under these Terms or otherwise, failure to deliver conforming Goods or other breach of any obligation or duty owed by Company hereunder or under applicable law, unless: (i) Purchaser notifies Company in writing at the address specified in these Terms within thirty (30) days from the date of such alleged breach or failure to deliver conforming Goods, provided Company does not remedy or correct the breach or non-conformity within sixty (60) days from the receipt of the notice; and (ii) such action or proceeding is commenced by Purchaser within twelve (12) months from the date the breach or non-conformity occurs for any action whether in contract, negligence or strict products liability, other than breach of warranty, regardless of the Purchaser’s lack of knowledge or, in the event of breach of warranty, within twelve (12) months from the date the breach occurs or from the expiration of the Warranty Period, or applicable statute of limitations period, whichever occurs first. Notwithstanding the foregoing, nothing contained in this paragraph 9 shall be construed to abridge or limit the express warranty contained in paragraph 2(a) hereof.
10. Design Protection. Other than with respect to unmodified designs submitted by Purchaser, Purchaser has no right, title or interest in or to (i) the Specifications and other specifications and technical information furnished by Company or supplied by Purchaser and modified by Company concerning the Goods or the proprietary information contained in any of the foregoing by reason of the sale of such Goods or otherwise; (ii) designs of Goods, (iii) Company Process Technology and (iv) any and all related improvements of any of the foregoing (the foregoing items (i) – (iv) are collectively, the “Company Property”). Purchaser, as a special inducement to Company, agrees not to directly or indirectly copy or reproduce any Company Property, and further agrees that it will not disassemble, decompile or reverse engineer the Goods or otherwise misappropriate or utilize the Company Property. The Company Property shall be kept confidential by Purchaser and Purchaser shall not disclose same to any third party, nor shall same be used by Purchaser for any purpose other than to assist Company in supplying the Goods. All Company Property and tooling supplied or purchased by Company shall be and remain the exclusive property of Company and/or Company’s affiliates (as applicable), and such property shall be delivered to Company at Company’s request. With respect to designs or Specifications owned by Purchaser, such ownership shall be exclusive of Company’s unique designs, technologies and internal components utilized in meeting Purchaser’s designs or the Specifications, as the case may be. All improvements to Company Property and the Goods and the related Intellectual Property shall remain the exclusive property of Company (and/or its affiliates as applicable) irrespective of whether the improvements were suggested or made by or on behalf of Purchaser or any other Person. For purposes hereof, the term “Company Process Technology” means the Intellectual Property associated with the underlying materials, manufacturing, fabrication, assembly and testing of Goods. The term “Intellectual Property” means intellectual property and proprietary rights of any kind or nature including, without limitation, know-how, designs, technical drawings and documents, specifications, processes, developments, improvements, confidential or proprietary information, trade secrets, inventions, patents, trademarks and copyrights.
Purchaser hereby acknowledges the validity of the Company Property including, without limitation, patents and patent applications presently pending. Purchaser hereby agrees that it will not directly or indirectly infringe the Company Property or contest or challenge the validity of the Company Property in any way.
11. Interest Charges and Attorneys Fees. Purchaser shall pay interest charges on past due amounts at a rate of the lesser of 1 ½ percent per month or the maximum rate permitted by law. In the event Company refers the Company’s invoice to an attorney for collection, Purchaser shall promptly pay all reasonable legal fees and disbursements incurred by Company in connection therewith.
12. Company’s Right of Possession. Purchaser acknowledges and agrees that Company shall have the right, at any time, and from time to time, for credit reasons or because of the occurrence of an Event of Default (as defined in paragraph 14) or Purchaser’s default under any other orders or agreements with Company (collectively, “Other Orders”), to withhold shipments in whole or in part hereunder or under Other Orders, and to recall all such goods in transit, retake same, and repossess all such goods which may be stored with Company for Purchaser’s account, without the necessity of taking any action and without incurring any liability for exercising its rights hereunder.
13. Insolvency Representation. Purchaser hereby represents and warrants to Company that Purchaser is not insolvent. For purposes hereof, the term “insolvent” means a Person who has ceased to pay his debts in the ordinary course of business or cannot pay his debts as they become due, or commits an act of bankruptcy within the meaning of Section 5 of the Bankruptcy Ordinance (New Version), 5745-1980 (“Bankruptcy Ordinance”), and Purchaser hereby acknowledges that it made this representation to Company immediately prior to the first delivery of Goods.
14. Default, Cancellation and Related Matters. The occurrence of one or more of the following events shall constitute an “Event of Default”: (i) Purchaser’s breach or failure to perform any of its obligations hereunder or under any Other Orders; (ii) Purchaser’s breach or misrepresentation of any representation or warranty made by Purchaser hereunder or under any Other Order; (iii) Purchaser makes a general assignment for the benefit of creditors or admits in writing an inability to pay its debts as they mature or takes advantage of, or files under any insolvency or bankruptcy statute or law, including, without limitation, the Bankruptcy Ordinance, or consents to the institution of proceedings or the filing of any petition thereunder, or any preceding is filed or commenced against Purchaser under any insolvency or bankruptcy statute or law which is not stayed and dismissed promptly, or any substantial part of the properties of Purchaser are placed in the control of a receiver, custodian, trustee or similar official, or Purchaser consents to the appointment thereof; (iv) prohibition of Company by any cease and desist order, injunction, or other valid order, decree, process of law, or restraint from shipping, selling, exporting or distributing any Goods pursuant to the terms hereof; (v) imposition of Damages by Company under paragraph 18(b), as reasonably determined by Company; or (vi) determination by Company, in its sole and absolute discretion, that the prospect of payment, or Purchaser’s financial condition, has been impaired or Purchaser may be insolvent within the meaning of Section 5 of the Bankruptcy Ordinance.
Upon the occurrence of an Event of Default, Company shall have the sole and absolute right to cancel all or any portion of the Goods ordered pursuant hereto and/or under Other Orders. Company shall exercise such right by giving written notice of its intention to do so to Purchaser. Company shall not be liable to Purchaser on account of exercising such cancellation right.
15. Insecurity. In the event Company, in its sole and absolute discretion, believes that an Event of Default has occurred or is likely to occur, then reasonable grounds for insecurity shall be deemed to exist and Company shall have the right to demand adequate assurance of due performance.
16. Choice of Law and Forum. (a) The parties acknowledge and agree that this Invoice shall be a contract made in Israel. All questions pertaining to the validity, construction, execution and performance of these Terms shall be construed and governed in accordance with the domestic laws of the State of Israel, without giving effect to principles of (i) comity of nations or (ii) conflicts of law.
(b) Any controversy or claim arising out of or relating to these Terms, or the breach hereof, shall be settled by arbitration in accordance with the Rules of Arbitration of the International Chamber of Commerce (“ICC”) then in force and effect (“Rules”) and administered by the ICC in accordance with the Rules, and judgment on the award rendered by the arbitrators may be entered in any court having jurisdiction thereof.
The arbitration proceedings shall be conducted before a panel of three (3) neutral arbitrators. The place of the arbitration shall be in Haifa, Israel. Any award in an arbitration initiated under this Invoice shall be in accordance with the laws of the State of Israel, as more particularly specified in paragraph 16(a). The successful party will be entitled to be awarded all costs, including reasonable attorney’s fees, paid or incurred by such prevailing party during the course of the arbitration proceedings.
In any arbitration initiated under these Terms the arbitrators will have no authority to award any: (i) injunctive or other equitable relief, or (ii) consequential, exemplary, incidental, indirect or special damages, lost profits or punitive or other damages not measured by the prevailing party’s actual direct damages, except as may be required by statute and then only to the extent such requirement cannot, as a matter of law, be waived. Any award shall include no injunction or direction to any party other than the direction to pay damages in accordance with the provisions hereof.
Except as required by law, neither party nor any arbitrator may disclose the existence, content or results of any arbitration hereunder without the prior written consent of Company and Purchaser.
If either party fails to proceed with arbitration as provided herein or unsuccessfully seeks to stay such arbitration, or fails to comply with any arbitration award, or is unsuccessful in vacating or modifying the award pursuant to a petition or application for judicial review, the other party shall be entitled to be awarded costs, including reasonable attorneys’ fees, paid or incurred by such other party in successfully compelling such arbitration or defending against the attempt to stay, vacate or modify such arbitration award and/or successfully defending or enforcing the award.
17. Cumulative Remedies. All of Company’s rights and remedies hereunder shall be cumulative and not exclusive and shall be in addition to all other rights and remedies available under applicable law. Failure by Company to exercise any right, remedy or option hereunder or under applicable law, or delay in exercising same, will not operate as a waiver, it being understood that no waiver by Company will be effective unless it is in writing and signed by Company, and then only to the extent specifically stated.
18. Intellectual Property Infringements and Indemnity. (a) Company makes no representations or warranties as to whether Goods are free from claims of third parties regarding infringement or the like, and same are hereby waived.
(b) In the event Goods are manufactured in accordance with Data supplied by Purchaser or derived from Company’s Data but modified to meet Purchaser’s particular requirements or instructions, Purchaser shall indemnify, defend and hold Company harmless from and against any and all liabilities, damages, losses, claims, actions, proceedings and expenses, including, without limitation, reasonable legal fees (collectively “Damages”) of whatsoever kind and nature, imposed upon, incurred by, asserted, threatened or awarded against Company directly or indirectly arising out of, relating to or resulting from (i) the infringement of any foreign or domestic patent, trademark, trade secret or other Intellectual Property, or (ii) the manufacture, sale or distribution of such Goods. Any and all amounts due for indemnity shall be paid as Damages are incurred, and in any event, within ten (10) days after written demand therefor.
19. Government Contracts. If Purchaser places any orders for Goods in connection with or under a government procurement contract or subcontract, then no government procurement law, regulation, supplement, or flow-down requirement shall be incorporated herein by reference, and same are hereby rejected and excluded, except Company agrees to adhere to any such mandatory government procurement law, regulation, supplement, or flow-down requirement that cannot be waived, to the extent Company is required to do so under applicable laws. However, to the extent Purchaser is the Israeli Government or one of its agencies, then, to the extent of a conflict between these Terms and any applicable law, rule or regulation (collectively, “Law”), such Law shall control and this Invoice shall be modified as provided in paragraph 21(k).
20. Inspections. Purchaser does not have the right to perform any tests, audits, inspections or surveillances (collectively, “Inspections”) at any of Company’s plants or the plants of Company’s affiliates, suppliers or subcontractors. The performance of any Inspections will be at Company’s sole discretion (i) pursuant to Company’s prior written instructions, (ii) in accordance with Company’s applicable policies, and (iii) provided that Purchaser executes Company’s standard non-disclosure agreement, and that any such Inspection does not interfere with the business or operations of Company.
21. Miscellaneous. (a) Integration. This writing is intended by the parties to be a final, complete and exclusive statement of their agreement with respect to the subject matter hereof. All prior or contemporaneous oral or written statements are hereby excluded and are superseded. It is expressly agreed that no course of performance, course of dealing or usage of trade shall be admissible to contradict, supplement or explain the terms of these Terms. Furthermore, it is expressly agreed that a party’s acceptance of or acquiescence in a course of performance under these Terms shall not be admissible to modify, waive, supplement or explain the terms hereof, even if that party is aware of the course of performance and has an opportunity to object to it.
(b) Assignability. These Terms shall be binding upon and shall inure to the benefit of the parties hereto and their respective successors and permitted assigns. Purchaser shall not have the right to assign its rights, benefits or duties hereunder without the prior written consent of Company. Any assignment in contravention of this provision shall be null and void, and of no legal force or effect.
(c) Export Control. The Goods, technology and Software (as defined in paragraph 21(e)) were exported from the United States and/or Israel in accordance with the U.S. Export Administration Regulations and/or applicable Israeli laws. Diversion therefrom contrary to such applicable U.S. or Israeli law is prohibited. Purchaser represents, warrants and covenants that Goods and Specifications will not be exported, re-exported or released to: (1)(a) any of the following countries or a national thereof, including Cuba, Iran, Sudan, North Korea, Syria or any country in Country Groups D:1 or E:2 (as specified in the then current Supplement No. 1 to Part 740 of the U.S. Export Administration Regulations), or other country (b) to any Person specified in Treasury Department Specially Designated Nationals and Blocked Persons List Supplement No. 3 to Part 764 of the U.S. Export Administration Regulations, (c) to any Person on the then current Unverified List available at the Bureau of Industry and Security Website (www.bis.gov) without the written consent of Company, or (d) to any entity as specified in Entity List Supplement No. 4 to Part 744 of the U.S. Export Administration Regulations, or (2) any countries or a national thereof or Person restricted by or in violation of any and all applicable Israeli laws, regulations and rules governing export or export controls including, without limitation, the Defense Export Control Law, 5766-2007 (“Export Control Law”), except in compliance with, and with all licenses, license exceptions and approvals required under, the Export Administration Regulations or Export Control Law and all other applicable export laws, rules, restrictions and regulations of the Department of Commerce or Israeli government and other applicable United States or Israeli agencies, ministries, bureaus and authorities, as amended from time to time, where applicable. This provision shall also apply to direct products of such Specifications. Purchaser acknowledges that the Goods will not be used in the design, development, production or use of nuclear, chemical or biological weapons or ballistic missiles or in a facility engaged in such activities or for any defense or military use (collectively, “Weapons Uses”). In the event that the intended end use of any of the Goods falls within any of the Weapons Uses, Purchaser shall immediately notify Company thereof in writing.
(d) Modification or Amendment. These Terms may not be modified or amended except by an instrument in writing signed by the party or parties against whom enforcement is sought.
(e) Notice of Software License. In the event Goods contain Software (as defined below) or Software is otherwise downloaded through the website of Company’s affiliate, Mini-Circuits, the use of such Software and the Software shall be subject to and only used in accordance with Mini-Circuit’s then applicable agreement addressing, among other things, software licensing (the “MC License Agreement”). In the event there is any conflict between any of the provisions contained in these Terms and any of the provisions of the MC License Agreement, the provisions which are more favorable to Company, as determined by Company, shall govern and control. For the purposes of these Terms, the term “Software” shall mean all Mini-Circuit’s software programs, object code, source code, drivers, dynamic-link libraries, and computer files, including without limitation, any additions, corrections, updates, modifications, upgrades, or releases thereto and any content contained in any of the foregoing made available or provided by or on behalf of Mini-Circuits to Purchaser.
(f) It is acknowledged that a breach by Purchaser of any provision of these Terms will constitute a substantial impairment to Company of the value of these Terms permitting Company to, among other things, suspend performance and/or no longer accept orders.
(g) Notices. All notices made hereunder shall be made in writing, and shall be deemed adequately delivered if delivered by certified mail, return receipt requested, postage pre-paid or by a courier service that regularly maintains records of its pick ups and deliveries, addressed to the parties at their respective addresses set forth above or to any other address designated by a party hereto by written notice of such address change. Mailed notices shall be deemed given when mailed and notices sent by courier shall be deemed given when delivered to the courier service. Both mailed and courier service notices shall be deemed received three (3) days after mailing such notice or delivering it to the courier service, as the case may be.
(h) In the event Company wishes to modify the Specifications for a particular Good, Company shall have the right to do so. If such modification affects form, fit or function of the Good in question, Company will comply with its then applicable product change notification process.
(i) Captions. The headings and subheadings of these Terms are included for convenience and identification only and are in no way intended to describe, interpret, define or limit the scope, extent, or intent of these Terms or any provisions hereof.
(j) Language Pre-Emption. The parties have requested that these Terms be drafted in English; Les parties ont exiges que cette entente soit redigee en anglais.
(k) Severability. Any term or provision of these Terms which is invalid or unenforceable in any jurisdiction on account of unconscionability or otherwise, shall, as to such jurisdiction, be ineffective to the extent of such invalidity or unenforceability without rendering invalid or unenforceable the remaining terms and provisions of these Terms or affecting the validity or enforceability of any of the terms or provisions of these Terms in any other jurisdiction. Further, to the extent that any term or provision hereof is deemed so invalid, void or otherwise unenforceable, but may be made enforceable by amendment thereto, the parties agree that such amendment may be made so that the same shall, nevertheless, be enforceable to the fullest extent permissible under the laws and public policies applied in any such jurisdiction in which enforcement is sought.
(l) Waiver of Breach. Any waiver of any of the provisions of these Terms shall not be effective unless made in writing and signed by the Company.
(m) This paragraph 21 and the following paragraphs 2, 3, 9, 10, 11, 12, 13, 16, 17, 18 and 19 shall survive the consummation, termination and cancellation of these Terms.
(n) Unless Company expressly agrees in writing and such agreement specifically pertains to the Goods (i) Company will not make any change in its customary quality control procedures to comply with any quality control requirement of Purchaser or its customers; and (ii) Company will not furnish any Specifications to Purchaser or its customers.
(Rev. 11-20)
Privacy Policy
Effective: November 22, 2020
ATTENTION: PLEASE READ THIS PRIVACY POLICY CAREFULLY BEFORE USING THIS WEBSITE. YOUR USE OF THIS WEBSITE INDICATES THAT YOU ACCEPT THIS PRIVACY POLICY.
PRIVACY POLICY
Our Commitment to Privacy
Mini-Circuits Israel Ltd. (“Mini-Circuits Israel”) recognizes and respects the importance of individual privacy and values the confidence of its customers. The globalization of business in this increasingly electronic economy makes the collection of personal information of individuals a necessity. It is our goal to balance the benefits of e-commerce with the preservation of individual privacy rights. This Privacy Policy describes the kind of information Mini-Circuits Israel may collect from you when you use this website (the “Website”), the reasons for collecting your information and how Mini-Circuits Israel may use the information collected from you. By accessing or using this Website, you consent to the collection, use and disclosure of the information collected from you in accordance with the terms of this Privacy Policy. This Privacy Policy supplements, and should be read in conjunction with, Mini-Circuits’ Israel Terms of Use for this Website which are accessible by you from the home page of this Website.
Collecting Your Information
Except as set otherwise set forth herein, you may generally browse this Website without being required to provide us any of your personally identifiable information. However, in some circumstances, we may request that you provide personally identifiable information, including, without limitation, (1) your first and last name, (2) a home or business mailing address, (3) a domain name or e-mail address, and (4) a telephone number. Although your response to such a request is completely voluntary, there are times when you may be required to provide personally identifiable information to us, such as when you request product information or to be contacted by a representative of Mini-Circuits Israel. If you do not elect to provide the information requested, we may be unable to process your request. In the course of your use of the Website, Mini-Circuits Israel may collect certain information, including, without limitation, your Internet Protocol address and other domain information as a part of our analysis of the use of our Website. This data enables us to become more familiar with which customers visit our Website and web pages, how often they visit, and what parts of the Website they visit most often. Mini-Circuits Israel uses this information to improve our web-based offerings. This information is collected automatically and requires no action on your part.
Your Access to Your Information
If you would like to view, update or delete any of your information that is collected by Mini-Circuits Israel, you may do so by emailing us at website@minicircuits.co.il. If requested, Mini-Circuits Israel will provide, update or delete, any information you have provided to us upon receipt of evidence reasonably requested by Mini-Circuits Israel. For the avoidance of doubt, nothing in this Privacy Policy shall prevent Mini-Circuits Israel from retaining your information where Mini-Circuits Israel is required to do so by law.
Use of Your Information
Mini-Circuits Israel may use the information it collects from you during the course of your use of the Website for a variety of business and marketing purposes including (1) responding to requests for product information, (2) for record-keeping and archival purposes pursuant to applicable law, (3) promoting Website development, (4) customer service purposes, and (5) to contact and correspond with you for marketing and other business purposes.
Pursuant to your acceptance of this Privacy Policy, you hereby acknowledge, agree, and consent to receive e-mail communications from Mini-Circuits Israel for purposes of, among other things, to receive (1) marketing material, promotional offers, events, and news related to Mini-Circuits Israel, (2) legal notices regarding changes to Mini-Circuits Israel online Terms of Use or this Privacy Policy as well as notices for any security breaches involving your information as required by applicable law, and (3) to correspond with you regarding any transactions you may have completed or attempted to complete on the Website or otherwise with Mini-Circuits Israel. Please note that your access or use of the Website is not conditioned upon your consenting to receive e-mail communications from Mini-Circuits Israel, and that you may opt-out of receiving future e-mail communication from Mini-Circuits Israel by clicking the “unsubscribe” link in any Mini-Circuits Israel e-mail communication e-mailed to you.
Mini-Circuits Israel will deem that your independent decision to access and use the Website constitutes an act of acceptance to the terms and conditions of this Privacy Policy and that you have given your permission and consent to us to collect, maintain, and use your personal information in accordance herewith.
Disclosure of Your Information
Mini-Circuits Israel may share and disclose your information with its (1) business partners, (2) affiliates, (3) subsidiaries, (4) legal representatives, (5) sales agents, (6) independent contractors, and (7) third-party vendors and suppliers for Mini-Circuits Israel’s business purposes described above.
Mini-Circuits Israel reserves the right to share your information to respond to duly authorized information requests of governmental authorities or where required by law. We may also provide your information to a third party in connection with the sale, assignment, or other transfer of the business of the Website.
Your information may be transferred to a location outside of the state of Israel. The data protection and privacy laws of the location to which your information is transferred may not be as comprehensive as the laws of the state of Israel. In the event of such a transfer outside of Israel, Mini-Circuits Israel will take measures to ensure that the recipient of such information provides an appropriate level of protection with respect to such information.
Collecting Your Information Through Cookies
Some pages on this Website use “cookies,” which are small files that are placed on your hard drive by the Website for identification purposes. These files are used for site registration and customization for when you visit the Website. Cookies identify you to the Website and are used to load your preferences and track the pages you visit. If your browser is set up to automatically accept cookies then your browser will add this small file to your hard drive. Most web browsers allow you to modify the way cookies are handled. You may be able to configure your web browser to warn you when it receives a cookie in order to be given a choice to accept or reject a cookie, or your browser may be configured to automatically refuse cookies. Each browser is different. Refer to the “Help” menu of your browser to learn how to change your cookie preferences. By not accepting cookies, some pages of the Website may not fully function. Your use of this Website constitutes and will, for all purposes, be deemed your consent to the use of “cookies” on this Website in accordance with this Privacy Policy.
Changing Our Privacy Policy
This Privacy Policy became effective as of the date set forth above. Mini-Circuits Israel reserves the right to make changes to this Privacy Policy from time to time. We will update the effective date posted at the top of this webpage and post an updated Privacy Policy for any changes we make. We recommend that all visitors and users of this Website re-visit this Privacy Policy page occasionally to learn of any new privacy practices or changes to our policy. Your continued use of this Website constitutes an act of acceptance of any changes to this Privacy Policy.
Website Terms of Use
TERMS OF USE
Terms of Use
Online Access of Mini-Circuits Israel’s Website
(Effective November 22, 2012)
ATTENTION: PLEASE READ THESE TERMS OF USE CAREFULLY BEFORE USING THIS WEBSITE. USING THIS WEBSITE INDICATES THAT YOU ACCEPT THESE TERMS OF USE.
IF YOU DO NOT ACCEPT THESE TERMS OF USE, YOU MAY NOT USE THIS WEBSITE.
Acceptance. The following terms of use (“Terms of Use”) apply to all users of this website (the “Site”) and constitute a legal agreement between (a) Mini Circuits Israel, Ltd. (“Mini-Circuits Israel”) and (b) you, and if accessing the Site on behalf of your company, then also your company. By using the Site you represent and warrant that: (i) you have, or if applicable, an appropriate representative of your company has read, understands and agrees to be bound by the Terms of Use and you have the power, authority and legal right to use the Site in accordance with these Terms of Use on behalf of yourself and if applicable, your company; (ii) if using this Site on behalf of your company, such use has been duly authorized by all requisite action, corporate or otherwise; and (iii) these Terms of Use are a valid, legal and binding obligation of you and your company, enforceable in accordance with their respective terms. If you or, as applicable, your company do not agree to these Terms of Use, you cannot use the Site. Mini-Circuits Israel may amend these Terms of Use from time to time, without notice, which amendments will be posted on the Site and will become effective upon posting. It is your responsibility to review these Terms of Use to determine if there have been any changes, which will be indicated by a revision to the effective date posted above. Your continued use of the Site after posting shall constitute your, and if applicable your company’s, acceptance of and agreement to be bound by the amended Terms of Use. The Terms of Use supplements and is in addition to: (x) Mini-Circuits Israel’s privacy policy, which is applicable and accessible by you from the home page of this Site; (y) any applicable written agreement(s) between Mini-Circuits Israel or its affiliates and you or your company; and (z) Mini-Circuits Israel’s standard terms and conditions, which are applicable and available upon request and accessible by you from the home page of this Site (the items referenced in (x), (y) and (z) are collectively referred to as the “Mini-Circuits Israel Terms”). In the event there is any conflict between these Terms of Use and the terms contained within any other applicable document, the terms which are more favorable to Mini-Circuits Israel, as determined by Mini-Circuits Israel, shall apply. Reference to the terms “you”, “your” or “yourself” in the remainder of these Terms of Use refers to both you and your company, collectively, unless otherwise expressly indicated.
Scope of License. You acknowledge that all information published on this Site (collectively, the “Information”) is protected in Israel and internationally by a variety of laws including, without limitation, copyright laws, trademark laws, patent laws and other proprietary rights laws. Accordingly, any unauthorized use of any such Information may violate any of such or other laws. The Information is provided by Mini-Circuits Israel for informational purposes only (the “Purpose”). This is a license, not a transfer of title. You acknowledge that there may be situations where the Information is subject to change, qualifications, variations, adjustments or modifications without notice. Moreover, you acknowledge and agree that the Site and the Information contained thereon may contain errors, omissions, inaccuracies, mistakes or deficiencies. Accordingly, you hereby acknowledge and agree that these risks and exposures exist while utilizing this Site, that your use of this Site is subject to such risks and exposures, and that Mini-Circuits Israel will have no liability on account of any of the foregoing, and that this Site should be used as a guideline only.
You may not: (a) modify, distribute, publish or transmit the Information for any public or commercial purpose; (b) reproduce the Information in any form, or by any means, without prior written permission from Mini-Circuits Israel; (c) remove any copyright or other proprietary notices from the Information or on any copy authorized by Mini-Circuits Israel; (d) transfer the Information to another entity or person; (e) allow or permit access to, or use of the Site, or any component thereof, by any unauthorized third parties or for any unlawful purpose; (f) engage in any conduct that in Mini-Circuits Israel’s sole and absolute discretion, restricts, inhibits or impacts any other authorized user from using the Site; (h) engage in any activities or practices that disrupt, circumvent or otherwise interfere with the operation of the Site; (i) access or attempt to access, without authorization, any password protected information on this Site or attempt to circumvent access restrictions or any other security measures; or (j) perform any act or omission that would violate these Terms of Use.
Without limiting Mini-Circuits Israel’s rights under paragraph 8, Mini-Circuits Israel may terminate this license at any time if you are in breach of these Terms of Use.Acceptable Use. You agree to use the Site as an authorized user, only for the Purpose and only in accordance with the Terms of Use. In the event of any unauthorized use of the Site or should any unauthorized use of the Site be reasonably suspected by you or your company, you must notify Mini-Circuits Israel immediately by telephone and concurrently provide written notice of the circumstances surrounding the event.
Disclaimer. THE Information CONTAINED IN THIS Site IS PROVIDED (AND THIS Site IS MADE AVAILABLE) “AS IS”, “WITH ALL FAULTS” AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND, ALL OF WHICH ARE HEREBY WAIVED. Mini-Circuits Israel DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, ARISING BY OPERATION OF LAW OR OTHERWISE, INCLUDING, BUT NOT LIMITED TO, THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND WARRANTIES AS TO WHETHER Mini-Circuits Israel’s PARTS, SOFTWARE OR THIS Site ARE FREE FROM CLAIMS OF THIRD PARTIES CONCERNING INFRINGEMENT OR THE LIKE. Mini-Circuits Israel DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE Site OR Information, AND MAKES NO COMMITMENT TO UPDATE THE Site OR Information CONTAINED HEREIN. Mini-Circuits Israel CANNOT GUARANTEE OR WARRANT THAT THE Site IS FREE OF VIRUSES, TIME BOMBS, TROJAN HORSES, WORMS AND OTHER DAMAGING COMPUTER PROGRAMMING ROUTINES OR HARMFUL COMPONENTS. Mini-Circuits Israel CANNOT GUARANTEE OR WARRANT THAT THIS Site IS FREE OF SAME WHEN IT IS ACCESSED BY A USER, NOR DOES IT MAKE ANY SUCH REPRESENTATION OR WARRANTY, AND SAME ARE HEREBY WAIVED. USERS BROWSE AND USE THIS Site AND Information CONTAINED HEREIN AT THEIR OWN RISK. Information CONTAINED IN THIS Site IS PROVIDED WITH THE EXPRESS UNDERSTANDING THAT Mini-Circuits Israel IS NOT RENDERING TECHNICAL OR PROFESSIONAL ADVICE OR OPINIONS ON SPECIFIC FACTS AND MATTERS AND, ACCORDINGLY, Mini-Circuits Israel ASSUMES NO LIABILITY IN CONNECTION WITH THE USE OF THIS Site OR THE Information. TO THE MAXIMUM EXTENT PERMITTED BY LAW, IN NO EVENT SHALL Mini-Circuits Israel OR ITS AFFILIATES BE LIABLE FOR ANY DAMAGES WHATSOEVER, INCLUDING, WITHOUT LIMITATION, CONSEQUENTIAL, EXEMPLARY, INCIDENTAL, DIRECT, INDIRECT OR SPECIAL DAMAGES, OR LOST PROFITS OR EXPENSES OF WHATSOEVER KIND AND NATURE, IMPOSED UPON, INCURRED BY OR ASSERTED OR AWARDED AGAINST YOU, DIRECTLY OR INDIRECTLY ARISING OUT OF, RELATING TO OR RESULTING FROM: (I) THE Site; (II) YOUR USE, YOUR INABILITY TO USE, OR ANY RESULT OF YOUR USE OF THIS Site OR ANY WEBSITES THAT ARE LINKED TO OR FROM THIS Site; (III) YOUR USE (OR RELIANCE ON ANY) OF THE Information CONTAINED IN THIS Site OR ANY SITE LINKED TO OR FROM THIS Site; (IV) ANY BREACH OF WARRANTY, EXPRESS OR IMPLIED, UNDER THESE Terms of Use OR OTHERWISE; OR (V) ANY OTHER BREACH OF ANY OBLIGATION OR DUTY OWED BY Mini-Circuits Israel OR ITS AFFILIATES, HEREUNDER OR UNDER APPLICABLE LAW, REGARDLESS OF WHETHER THE LIABILITY RESULTED FROM ANY GENERAL OR PARTICULAR REQUIREMENT OR NEED WHICH Mini-Circuits Israel KNEW OR SHOULD HAVE KNOWN OF. THIS LIMITATION OF LIABILITY WILL APPLY TO ANY CLAIM WHETHER THE CLAIM IS BASED ON CONTRACT, TORT, WARRANTY OR ANY OTHER LEGAL THEORY, AND REGARDLESS OF WHETHER Mini-Circuits Israel HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN THE EVENT THAT ANY TERM OF ANY AGREEMENT BETWEEN YOU AND Mini-Circuits Israel OR ITS AFFILIATES IS FOUND UNCONSCIONABLE OR UNENFORCEABLE FOR ANY REASON, THIS PROVISION OF WAIVER BY AGREEMENT OF CONSEQUENTIAL DAMAGES SHALL NEVERTHELESS CONTINUE IN FULL FORCE AND EFFECT.
Trademarks. Any trademarks, logos, slogans, product designations and service marks (collectively “Marks”) displayed on this Site are the property of Mini-Circuits Israel or other third parties. You are not permitted to use these Marks without the prior written consent of Mini-Circuits Israel or such third party which may own the Mark. This Site may contain information and disclosures of parts, methods or other technology which may be the subject of intellectual property protection owned by Mini-Circuits Israel.
Links to Third Party Sites. This Site may contain links to other third party websites (“Third Party Sites”). Mini-Circuits Israel makes no representations about any Third Party Sites or the content thereof which you may access through this Site. You acknowledge that Mini-Circuits Israel has not reviewed these Third Party Sites, has no control over such Third Party Sites or the content thereof, and is not responsible for any of these sites or their content. Accordingly, you acknowledge and agree that access to any Third Party Site is at your own risk and Mini-Circuits Israel shall have no liability therefor. Mini-Circuits Israel is not responsible for the accuracy, reliability or completeness of any information, data, opinions, advice or statements made on these Third Party Sites. Neither Mini-Circuits Israel nor its affiliates shall be liable for any damages or injury arising out of or relating to the content of any Third Party Site or your use thereof, and same are hereby waived. Mini-Circuits Israel provides these links merely as a convenience and the inclusion of such links does not imply an endorsement, sponsorship or recommendation by Mini-Circuits Israel of anything contained on Third Party Sites, or its products or services. Mini-Circuits Israel reserves the right to terminate any link at any time.
Moreover, a Third Party Site may provide a link to this Site (“Links”). This does not indicate an endorsement, authorization, sponsorship, affiliation, joint venture or partnership by or with Mini-Circuits Israel. In most cases, Mini-Circuits Israel is not aware that a third party has linked to this Site. You acknowledge and agree that neither Mini-Circuits Israel nor its affiliates shall be liable for any damages or injury arising out of or relating to your use of this Site resulting from a Link to this Site from a Third Party Site, and same are hereby waived.
Mini-Circuits Israel cannot guarantee that any of the Third Party Sites or Links will be free from any viruses, time bombs, trojan horses, worms or any other damaging computer programming routines or harmful components. Moreover, Mini-Circuits Israel does not make, and you hereby expressly waive, any and all representations and warranties with respect to the availability, use, accuracy, reliability, or the results of the use of, the Third Party Sites and the Links and same are hereby waived. Accordingly, Mini-Circuits Israel hereby disclaims all warranties, express or implied, arising by operation of law or otherwise, including, but not limited to, the warranties of merchantability, fitness for a particular purpose and warranties concerning infringement or the like, all of which are hereby waived.Downloading. To access certain information on this Site, you may need to download such information onto your own computer. You acknowledge and agree that your right to download information from this Site is strictly limited to the Purpose and for no other purpose whatsoever. Information which is downloaded may only be displayed by you for the Purpose, provided it is not modified in any way and that all notices are maintained without change including, without limitation, copyright notices. You also acknowledge and agree that any Information downloaded from this Site is done at your own discretion and risk and you are solely responsible for any loss of data or damage to your computer that may result from the download of such information.
Termination of Access. Mini-Circuits Israel shall have the right to terminate, limit or suspend your access to all or any part of the Site at any time, with or without notice, for any reason or no reason, including without limitation, for any conduct that Mini-Circuits Israel believes is in violation of these Terms of Use or any applicable laws or is harmful to the interests of another user, any third party or the Site. Moreover, Mini-Circuits Israel reserves the right to discontinue the availability of the Site or any portion thereof at any time, and you agree Mini-Circuits Israel will have no liability for doing so.
Privacy Policy. User acknowledges that User has read, understands, and agrees to Mini-Circuits Israel’s Privacy Policy, which is accessible by you from the home page of this Site.
User Submissions. You acknowledge and agree that any questions, comments, suggestions, ideas, feedback or other information about the Site (“Submissions”) provided by you to Mini-Circuits Israel are non-confidential and shall become the sole property of Mini-Circuits Israel. Mini-Circuits Israel shall own exclusive rights to the Submissions, including all intellectual property rights, and shall be entitled to the unrestricted use and dissemination of these Submissions for any purpose, commercial or otherwise, without acknowledgment or compensation to you. You represent, warrant and agree that Submissions made by you (i) will be true and accurate; (ii) do not and will not violate or infringe upon the rights of any third party, including copyright, trademark, privacy, publicity, or other personal or proprietary rights; and (iii) will not contain material that otherwise violates these Terms of Use, applicable laws, rules or regulations.
Contact Mini-Circuits Israel. If you need to contact us regarding these Terms of Use, we may be reached by emailing us at website@minicircuits.co.il.
Miscellaneous.
Mini-Circuits Israel makes no representation that Information in this Site is appropriate or available for use outside of the State of Israel. Access to this Site is prohibited in any territories where the content of this Site is illegal.
You acknowledge and agree that the Terms of Use shall be a contract made in the State of Israel. All questions pertaining to the validity, construction, execution and performance of the Terms of Use shall be construed and governed in accordance with the laws of the State of Israel, without giving effect to principles of (i) comity of nations or (ii) conflicts of law. The Terms of Use shall not be governed by the provisions of the U.N. Convention on Contracts for the International Sale of Goods. Subject to either party’s right to seek arbitration under the provisions of this paragraph 12(b), any action commenced in connection with the Information, this Site or these Terms of Use, shall be brought in courts located in the Haifa, Israel, and to the extent not otherwise subject to the jurisdiction of such courts, you agree to waive any objection to such jurisdiction and to subject yourself to the jurisdiction of such courts. You further agree that service of process for any such action may be made by certified mail, return receipt requested, or by courier service that regularly maintains records of its pick-ups and deliveries, at your last known address, in addition to any other method of service of process authorized by applicable law. Any controversy or claim arising out of or relating to the Information, this Site or these Terms of Use shall be settled by arbitration in accordance with the Rules of Arbitration of the International Chamber of Commerce (“ICC”) then in force and effect (“Rules”) and administered by the ICC in accordance with the Rules, and judgment on the award rendered by the arbitrators may be entered in any court having jurisdiction thereof. The arbitration proceedings shall be conducted in English, before a panel of three (3) neutral arbitrators. The place of the arbitration shall be in Haifa, Israel. Any award in an arbitration initiated under these Terms of Use shall be in accordance with the laws of the State of Israel. In any arbitration initiated hereunder, the arbitrators will have no authority to award to you any consequential, exemplary, incidental, indirect or special damages, lost profits or punitive or other damages against Mini-Circuits Israel or its affiliates.
User agrees to be bound by all applicable laws and regulations that may pertain to the Site, including without limitation applicable Israel export laws and regulations. If you choose to access this Site from outside of Israel, you do so on your own initiative and are responsible for compliance with applicable local laws.
Mini-Circuits Israel’s obligations with respect to its parts are governed solely by the agreements it enters into with its customers and vendors. The rights and obligations concerning the sale of parts to you by Mini-Circuits Israel are governed by Mini-Circuits Israel’s standard terms and conditions, which are applicable. A copy of these terms and conditions is available upon request and is accessible by you from the home page of this Site.
Failure or delay by Mini-Circuits Israel to enforce compliance with any term or condition of these Terms of Use shall not constitute a waiver of such term or condition.
These Terms of Use and the Mini-Circuits Israel Terms constitute and contain the entire agreement between Mini-Circuits Israel and you with respect to your access to and use of this Site and its content and supersedes and replaces all prior agreements, prepared or otherwise, whether written or oral, concerning your access to and use of this Site.